Start date
End date
Results from UniTTe project will be presented at the Wind Europe conference & exhibition 2017 in Amsterdam (28-30 Nov. 2017), with three presentations.
A simple induction model characterizing the evolution of the wind flow approaching a wind turbine rotor is presented - along with the numerical simulation results that...
The 4th and last measurement campaign of the UniTTe project has started in July 2017 in Hill of Towie, Scotland, UK. The purpose of the campaign is to demonstrate how...
The 3rd measurement campaign of the UniTTe project was conducted between June and August 2017 in Ogorje, Croatia. A partnership was established with Akuo Energy, who...
Scientific results from the UniTTe project were presented at the Wind Energy Science conference in Copenhagen (26-29 June 2017), with five oral presentations.
CFD model of a wind turbine inflow (induction zone) was validated by comparison to 3D measurements within this zone using the triple lidar system (DTU short range WindScanner...
An innovative methodology to estimate wind field characteristics from turbine-mounted lidars is presented along with experimental results in a scientific paper by Antoine...
The latest results regarding the characterisation of turbulence with nacelle lidars are presented in a scientific paper by Alfredo Pena, Jakob Mann and Nikolay K. Dimitrov...
Project partners and members of the advisory board have presented last development, experience and challenges of using nacelle lidars for wind turbine power performance...
Rozenn Wagner will present an overview of the project goals and status at the WindEurope Summit in Hamburg, on 27-29 September 2016. Antoine Borraccino will present wind...
Alexander R.M. Forsting will present “A numerical study on the flow upstream of a wind turbine in complex terrain” at the Torque conference 2016 in Munich, on 5-7 October...
Antoine Borraccino will present how nacelle lidars’ measurements can be used to reconstruct free wind parameters at the ISARS 2016 conferencein Varna, Bulgaria, on...
After post-processing some of the raw data from the Perdigão experiment, conducted by researchers from DTU Wind Energy in May till June of this year, a real-world visualisation...
Turbine inflow measurements with two nacelle profiling lidars on a wind farm in North Denmark.
Nikolay Dimitrov will present a methodology to incorporate lidar measurements in load calculations at the ICASP12 conference in Vancouver on 12-15 July, 2015. ...
Follow the blog on the short and long range Windscanner in Portugal.
Alexander Raul Mayer Forsting will present his first results on induction modelling and simulations at the “ Wake conference”, 9-11 June 2015 in Visby, Sweden.
Attending the DEWEK Conference on 19-20 May 2015? Don't miss the opportunity to hear about UniTTe first Measurement campaign on 20 May.
Antoine Borraccino will present the lidar calibration procedures developed in UniTTe at the DEWEK conference in Bremen on 19-20 May, 2015. The oral presentation “Calibration...
Measurement of turbine inflow with a 3D WindScanner system and a nacelle mounted SpinnerLidar:
Description of Works and background of the 2 new PhD students on UniTTe.